Ariston SENSYS HD - 1.6 Hp Water Heater home page; 1.7 Stand-by page

Description
34 / EN
Cooling time schedule profile
0 2 4 6 8 10 12 16 20 14 18 22 24
19° 19° 19°26° 26°
Fig. 10
Available only for products configured for the cooling mode. If
the device is associated with a zone, the cooling time schedule
profile of the relevant zone is displayed. If the device is config-
ured as a system interface (Zone 0), the cooling time schedule
profile of the zone defined by the 0.4.0 parameter is shown.
Domestic hot water time schedule profile
0 2 4 6 8 10 12 16 20 14 18 22 24
35,0° 35,0° 60,0°60,0°
Fig. 11
If the system is configured for producing domestic hot water,
the domestic hot water time schedule profile is displayed.
Domestic hot water heat pump mode
Fr 4-JUN 12:30
Internal temperature
20°
Required temperature
21°
Outside air temperature
16°
Operation mode
55°C
Fig. 12
If there is a domestic hot water heat pump, the product’s op-
erating mode and the set-point temperature of the water are
shown.
CO2 saved
System Performance
Energy data
>
Units of measure and costs >
CO2 saved >
Showers n° 5
Report Reset >
Fig. 13
If there is a solar heating controller, the estimate for the CO2
saved for the production of domestic hot water is shown.
Empty field
16°
Fig. 14
Active sources
Fig. 15
For the meaning of the icons, refer to the paragraph “Complete
home page”.
1.6 Hp Water Heater home page
10°
70
°C
°C
40
55
,0
°
50%
I-memory
Fr 4-JUN 12:30
1
2
Fig. 16
1 Domestic hot water set-point temperature
2 Domestic hot water heat pump mode
The “Hp Water Heater” home page can only be selected if the
device is configured as a system interface (Zone 0) and a do-
mestic hot water heat pump is installed. For the meaning of
the icons, refer to the paragraph “Complete home page”.
1.7 Stand-by page
10°
12:00
21
,0
°
Monday 1 March 2021
Fig. 17