Ariston SENSYS HD - 2.9 Diagnostics; 2.10 Screen settings; 2.10.1 Language; 2.10.2 Time & Date

User Menu
46 / EN
2.9 Diagnostics
Diagnostics
Boiler
>
Heat Pump >
Solar Controller >
Fig. 59
The diagnostics page shows the main operating parameters of
the devices present in the system.
Boiler
CH flow set T 55°C
CH flow temperature 20°C
CH return temperature 20°C
Fig. 60
Likewise, in the event of heat pump cascades, the main pa-
rameters of the cascade manager and of the individual slave
devices are shown.
HHP cascade management
CH flow set T
40 °C
System flow T 34 °C
Storage temperature high 60 °C
Total heat pumps 5
Available heat pumps 4
Active heat pumps 0
Fig. 61
Heat pump slave 1
Status
>
Hydraulic circulation >
Heat Pump TDM >
Auxiliary sources >
Fig. 62
2.10 Screen settings
2.10.1 Language
Screen settings
Language English
Time & Date >
Home screen >
Screen brightness
50%
Standby settings >
Fig. 63
– Turn the selector to highlight the “Language” item
– Press the selector to enter the edit mode.
– Turn the selector to choose the desired language.
– Press the selector to confirm.
2.10.2 Time & Date
Time & Date
Date
30 / 05 / 2021
Time 15 : 20
Legal hour Auto
Save
Fig. 64
– Turn the selector to change the value of the select-
ed field.
– Press the selector to skip to the next item.
– To change a previously set value, press the “Back” button
.
2.10.3 Home screen
From this menu you can set the type of home page.
– Press the selector to enter the edit mode.
– Turn the selector to choose one of the available
settings: “Complete”, “Base”, “Customizable” and “Hp Wa-
ter Heater”.