Ariston SGA X 300 - Technical Characteristics; Overall Size

26
GB
The heater is made up of:
• a tank protected inside by a layer of vitreous enamel, with a long-life anode for
protection against corrosion;
• an outer covering in painted steel;
• an insulation using high density polyurethane foam (without CFC) that reduces
heat losses;
• a fl ue gas hood to protect against the return of combustion products;
• a gas valve complete with:
an adjustable termostat with
a number of positions,
a safety system using a thermocouple,
a temperature limiter that stops the gas supply if operation is not correct;
• a tubular low-noise stainless steel burner, adaptable for use with all types of gas;
• piezoelectric ignition;
• a safety device to protect against the return of fl ue gas.
OVERALL SIZE
CATEGORY II
2H3+
Type B11 BS
for heaters arranged for operation with natural gas (methane) adaptable to
operation with LPG.
TECHNICAL CHARACTERISTICS
116
316
674
400
632
88
116
1625
1681
20
(int. ø111)
HOT WATER OUTLET
COLD WATER INLET
RECIRCULATION CIRCUIT G 3/4”
PILOT BURNER VISION
ANODE
MODEL Capacity (litres)
HEATING TIME
Heat input kW
Useful rating kW
t 25°C t 45°C
300
275
40 min 65 min
16
14