24 2X-A Series Operation Manual
Viewing current events
To view current event information, press F1 (Show events) and then select the
event type to view.
The event types available to this user level are:
• Alarms
• Alerts
• Faults
• Conditions
Alerts are device alarms that require confirmation from another configured alarm
event before an alarm is indicated at the control panel.
Conditions include all other system events. Examples: tests and disablements in
the fire system.
Viewing support information
To view support information configured by your installation or maintenance
contractor, press F3 (Support). Your installer or maintenance contractor may
configure, for example, contact information, or different messages to display in
alarm and non-alarm situations.
Note: This information is only available if your installation or maintenance
contractor has included it in the fire system configuration.
To Next Page
Loading...