Arlec AM125 - Page 2

WARNING
WARNING! Please ensure the button batteries are kept OUT OF REACH
OF CHILDREN.
If a button battery is swallowed, SEEK IMMEDIATE MEDICAL ATTENTION.
Do not let the child eat or drink; Do not induce vomiting.
To keep your children safe:
• Keep this device out of reach of small children.
• Keep new batteries in their packaging until ready to use and
store in places out of reach of children.
• Safely dispose of spent batteries immediately.
INSTALLATION
Remove the transparent battery isolation strip.
Peel o the adhesive protection sticker on the back of the unit then attach it on the
door/window or desire location.
To replace battery, slide o the battery cover in the lower part of the front panel.
Insert 3 LR44 button cell batteries (included) into the battery compartment, check the
battery polarity is inserted correctly.
Gently reassemble the battery cover.
OPERATION
Slide the ON/OFF switch to ON, and the unit is now armed.
If the unit detects door/window opened, the unit will active immediately and sound.
To deactivate, close the door/window or slide the ON/OFF switch to OFF.
If the alarm sound becomes weak, please replace battery.
NOTE
• Thisunitisforindooruseonly.
• Thehigh-pitchedalarmsoundmaydamagehearingifincloseproximitytotheears.
• Toensurealarmperformance,checkthebatteryconditionevery3months.
• Itisrecommendedtomounttheunitatleast1mheightfromtheoortokeepout
of reach from children.
CPIN002729A6 (105mmW x 148mmD)
ULTRA
LOUD
100dB
ALARM
EASY
DIY
INSTALLATION
FITS
WINDOW
FRAMES
DANGER if swallowed