Open Access
Summary of Programmable Devices
C-3
ARM Development Board (ARM7TDMI
Version) Hardware Reference Guide
ARM DUI 0017C
C.1.2 Daughter board device
The daughter board contains one programmable device.
C.1.3 MACH and PALCE
All MACH and PALCE devices can be reprogrammed. The functionality of these devices was
designed using PALASM.
The PALASM source is available from ARM, as described in
1.3 Useful Contacts
on
page 1-3.
C.1.4 FPGA
The FPGA is programmed by serial PROM (U28). To reprogram the device you need to
replace this PROM with a new one.
The FPGA design was completed using VHDL and synthesised using the Compass
synthesizer. The VHDL source is also available from ARM.
Ref ARM Name Ident. Device
U2 CPU4 EFI-0030 MACH215-12
Table C-2: The daughter board programmable device
hrg.book Page 3 Wednesday, July 22, 1998 9:18 AM
To Next Page
Loading...
