Need help?Do you have a question about the Armstrong HumidiClean HC-6500 Series and is the answer not in the manual?
General| Brand | Armstrong |
|---|---|
| Model | HumidiClean HC-6500 Series |
| Category | Humidifier |
| Language | English |
Warning about high voltages inside the humidifier.
Covers wiring, installation, temperature, and environmental safety.
Covers mounting, water fill supply, and electrical wiring.
Guidelines for control wiring and initial humidistat setup.
Installation of high limit, airflow, and pressure switches.
Steps during initial power-up, water filling, and preheating.
How demand signals control steam output and triac modulation.
Inspection and cleaning of ionic beds and drain screen.
Chemical cleaning and cleaning of water level electrodes.
Detailed steps for replacing the ionic beds in the unit.
Troubleshooting steps for no water fill or low amperage draw issues.
Addressing issues with steam output after fill and humidifier overfilling.
Troubleshooting dispersion tube spitting and water in the cabinet.
Lists and explains various diagnostic error codes and their causes.
Various wiring diagrams for HC6100 and HC6300 models.
Wiring diagrams for HC6500 and HC6700 models.
Explanation of Proportional Band, Integral Reset, Derivative Gain, and SI Interval.
Advice on adjusting PID values for optimal performance.
To Next Page
