Arneg BERGEN 2 BT/TN GI R290 User Manual (English)

Questions and Answers:

T
Travis RoachAug 5, 2025
What to do if my Arneg Merchandiser cabinet stops and does not restart?
- D
  davisamandaAug 6, 2025
  If your Arneg Merchandiser cabinet stops and doesn't restart, it could be due to several reasons: * A power black-out: Check the cause of the black-out. * The master switch is turned off: Turn the switch on. * Breakers triggered: Check the temperature of the condensing unit. * A faulty electric controller: Repair or replace the controller. Also, once the electrical supply has been restored, ensure all electrical equipment restarts without triggering overload protection. If power isn't restored quickly, store goods in a cold room to maintain temperature.
C
craig16Aug 13, 2025
Why is my Arneg Merchandiser cabinet not cooling sufficiently?
- C
  Christopher MarshAug 13, 2025
  If your Arneg Merchandiser cabinet isn't cooling sufficiently, here's what might be happening: * The cabinet is in defrosting phase: Wait for defrosting to complete (about 30 minutes). * Air inlets are obstructed: Clear the air inlets. * The load is not distributed evenly: Load the goods in order as shown in Fig.12. * The capacitor is dirty: Clean the capacitor as described in chapter 22.5. * The cabinet is next to air currents or heat sources: Check the cabinet's position inside the store. * The cabinet is not levelled: Level the cabinet.
M
Melissa CooperAug 20, 2025
How to stop condensate in Arneg Merchandiser?
- C
  Christopher BrownAug 20, 2025
  If you notice condensate forming in your Arneg Merchandiser, it could be due to: * Poor room conditions: Check the position of the cabinet inside the store. * Poor air ventilation: Check the operation of fans and wiring. * The window heaters not working: Check electrical connections. * The windows not closed properly: Close the windows properly.