ARO 8506-A - Housing and Adapter Assemblies; Finder Adapters; Needle Bearing Adapters; Finders for Hex Bits

ACCESSORIES
HOUSING AND ADAPTER ASSEMBLIES
FlNDER ADAPTER IS
PRESSED
INTO HOUSING.
FINDER ADAPTER 39332
HOUSING ASSEMBLY
HOUSlNG AND FINDER ADAPTER -USE WITH FlNDERS 36106-(), 36105-(), 41292-() AND 41292-(). ALSO USE WITH GUIDES 30334-(), 40261 AND 41767. ALSO
FOR USE WITH BALL LOCK ADAPTER ASSEMBLY 44699 WITHOUT USE OF GUIDE BUSHING.
.
ASSEMBLY NUMBER HOUSING DIMENSION “A” CLUTCH USED ON
36796
36331 3”
ADJUSTABLE
39312-1
39323
4-1/2”
TORQMATIC
37023
37631 2-1/4”
POSITlVE
37023
37031
2-1/4”
DIRECT DRIVE
HOUSING ASSEMBLY
NEEDLE BEARING ADAPTER IS PRESSED INTO HOUSING.
FOR USE WITH 37792-4 BALL LOCK ASSEMBLY AND 38815-2 AND 39616-4 SQUARE DRIVE ASSEMBLIES. PAGE 17.
ASSEMBLY NUMBER HOUSING DIMENSION “A” CLUTCH USED ON
36769-l
36331
3” ADJUSTABLE
39312-3
39323 4-1/2”
TORQMATIC
37929-l 37931 2-1/4”
POSITlVE
370251 37631 2-1/4”
DIRECT DRIVE
FINDERS
STANDARD LENGTH FOR 1/4” HEX BITS
NOTE: SPRING 39111 AND LOCK SPRING 31574 REQUIRED FOR USE
WITH FINDERS (ORDER SEPARATELY). USE WITH FINDER ADAPTER
36332.