11
REMOVING AND INSERTING THE FILTER
Do not attempt to remove lter until
the unit has cooled completely. Open
the lid.
Open the lid
Wash and rinse the lter, then
replace.
Once the lter is securely in place,
the kettle will be ready for use.
Grasp the angled tab on the lter
and pull upward. The lter should
slide out easily.
Grasping the lter at the angled
tab, slide the lter into the slots
on the inside of the spout until the
lter sits securely into place.
1
1
• It is necessary for the
lter to be properly in
place for the kettle to
shut o automatically.
3
3
2
2
NOTE
HELPFUL
HINT
• Misplace your lter?
Replacement parts
are available online at
www.AromaCo.com
or contact Aroma®
Customer Service toll-
free at 1-800-276-6286.
To remove the lter:
To insert the lter:
To Next Page
Loading...
