Support parking guard (with hardwire kit, optional)
OPERATION
Read this chapter to learn how to operate the camera.
Turn on / off camera
This camera does not have an internal battery, it utilizes a super capacitor, so it must be
continually connected with the power supply when using.
When connected with the power source, the camera will automatically turn on. If no power
source, camera will automatically turn off very soon.
When the camera is recording or in standby, user can long press POWER button to turn
off the camera.
Recording Video
When the camera is in standby, short press OK button to start video recording; short press
OK button again to cancel video recording.
The camera is also pre-configured to auto start recording once it receives power, i.e. when
the car engine is started.
The camera is also pre-configured to auto stop recording and turn off once it loses power,
i.e. when the car engine is stopped.
Take Photo
When camera is recording, long press OK button to take a photo.
When camera is in standby, long press DOWN button (one time) to enter photo mode,
short press OK button to take a photo. here you can use UP and DOWN buttons to set the
focus length to magnify or shrink the image.
Options:1.0x to 4.0x.
To Next Page
Loading...