Array Solutions - SAL12/20/30 - Mark II Manual – Rev. 1.5.1 – September, 2018
Close up views of combiner and connections. The PVC four way 1-1/4” coupling
(not supplied) is a suggestion of what could be used to keep the couplers
transmission lines away from themselves, the RG-6 cables and from the metallic
mast. You can use wooden stakes or PVC pipes driven in the ground or any other
non-conductive material structure to find your own solution for the TX lines
routing.
Transmission lines connections into the combiner terminals.
To Next Page
Loading...