Arris M900 - Flight Operations and Troubleshooting; Arming, Takeoff, and Flight Modes; Frequently Asked Questions (FAQs)

drone will hold at that position.
9. Switch to Return to home, the drone will fly to the take off point and land
automatically.
* If the take off place is not plain, we suggest you land manually.
Other Reference Videos:
1. Take Off and Return to Home
https://www.youtube.com/watch?v=vku5UI_N8cc&list=PLznJrCGq3g5Nc2BZpV56nd
KoUwyAj7Os3&index=2
2. Mission Plan/ Route Plan
2.1 https://www.youtube.com/watch?v=QHND7-lj8-4&list=PLznJrCGq3g5Nc2BZpV5
6ndKoUwyAj7Os3&index=4
2.2 https://www.youtube.com/watch?v=pnw99cyqu1I&list=PLznJrCGq3g5Nc2BZpV5
6ndKoUwyAj7Os3&index=5
2.3 https://www.youtube.com/watch?v=39St2uMjx7Q&list=PLznJrCGq3g5Nc2BZpV5
6ndKoUwyAj7Os3&index=6
3. Drop System Control
https://www.youtube.com/watch?v=kCRcKUfHvew&list=PLznJrCGq3g5Nc2BZpV56nd
KoUwyAj7Os3&index=
4. Camera Angle Control
https://www.youtube.com/watch?v=SV6N1GV3nXo&list=PLznJrCGq3g5Nc2BZpV56n
dKoUwyAj7Os3&index=13
FAQS
1. Does the ARRIS M900 has None fly zones?
We did not set any “none fly zones” in the flight controller. But we do not suggest
you to fly it in restricted areas.
2. Does the ARRIS M900 has GEO Fencing
We did not enable the GEO Fencing function on the ARRIS M900. If needed,
customer can set it according to your own needs.
3. How to turn on the LED on the 3in1 Camera?
Click the “Image/Video display” window, You could see a light icon on the right side,
click it, the LED will be on/off.
4. Radio could not bind with the drone
If you did not upgrade/downgrade the firmware of the radio and receiver, you can
short-circuit the Key mode and GND channel on the receiver, and then click the