To Next PageTo Next Page
Need help?Do you have a question about the Arrow CPH122007 and is the answer not in the manual?
Handle building parts carefully due to sharp edges. Wear gloves and eye protection.
Practice proper tool safety, avoid windy days, keep site clear of children/pets.
Anchor building to prevent wind damage. Do not concentrate weight on the roof.
Clean exterior with mild soap, avoid power washing. Prevent rust by avoiding scratches and debris.
Assemble on dry, calm days with at least two people for efficiency and safety.
Lists necessary tools and materials for assembly, including safety gear and preparation tools.
Choose a level area with good drainage and sufficient workspace for assembly.
Provides customer service phone number and email address for missing or damaged parts.
Diagram illustrating assembly sequence using part numbers and key identifiers.
Begin assembly by connecting frame pieces using specified parts and quantities.
Attach vertical support pieces to the assembled frame according to the diagram.
Connect gable support pieces to the frame, ensuring correct orientation and quantity.
Join the base frame sections using specified fasteners and quantities.
Continue securing the frame structure by adding more fasteners as shown.
Install ground anchoring components to stabilize the structure.
Begin attaching the roof panels, ensuring proper overlap and alignment.
Attach the first set of side panels to the frame structure.
Continue attaching side and roof panels, ensuring correct placement.
Securely fasten the roof panels using the specified hardware.
Finish attaching all roof panels, ensuring a tight and secure fit.
Perform final tightening and securing of all installed panels.
Apply sealing tape to the roof seams for weather protection.
General| Brand | Arrow |
|---|---|
| Model | CPH122007 |
| Category | Outdoor Furnishing |
| Language | English |
