180°
Assembly InstructionsOLIVIA Sewing Cabinet Page 3
Understanding How the “ARROW-LOC” Cam Fastener Works
Cabinet Assembly
Position bolt in
pre-drilled hole and
turn until tight.
Press cam Into pre-drilled
hole until flush with surface.
Insert bolt through pre-drilled
hole in edge of panel.
To lock, rotate cam
until tight, using a
screwdriver.
ARROW TOWARDS
HOLE IN EDGE!
FIG. 1.
x2
x2
Step 1. Place all wood panels and pieces on a flat
working area. Insert Cams (x32) and Connecting
Bolts (x32) into the wood panels* (As shown in FIG.
1). Insert 8x30mm Wood Dowels (x16) into Dowel
holes on Panel (A) and on side edges of panels (E).
*4 Connecting bolts on back of Left Inside Panel (D)
and Right Inside Panel (L) (As shown in FIG. 1A).
Note: For added support, drop 2 to 3 drop of wood
glue in each dowel hole before inserting wood dowels.
Allow several minutes to dry.
Connecting Bolts x32
Cams x32
Wood dowel 8x30mm x16
Back side
FIG. 1A.
To Next Page
Loading...