Artec MICRO - Page 11

11
Artec Micro comes with a variety of jigs to hold
objects.
1. Vise
2. Gum jig
3. Screw jig
4. Spacer
5. Spacer
6. Calibration panel
Between jaws
Use adhesive
putty (Blu Tack)
Between screws
–
–
–
Use the gum jig
(magnetic plate)
or screw jig
Affix between
screws of screw jig
Use magnetic
locks to attach to
any spacer
Use magnetic
locks to attach to
the turntable or
another spacer
–
Use magnetic
locks to attach to
the two spacers
Jig
How to affix
object?
How to install in
the scanner?
HOW TO USE ARTEC MICRO