Troubleshooting alarms Volumetric Divider
"Calybra"
Via Lago di Tovel, 14 - 36015 Schio (VI) - Italy
Tel +39-045-8182511 Fax +39-0445-50090
\\Servcad\macchine\UT\2 Documenti\2.2 Istruzioni Operative
APPLICABILITY OF THE DOCUMENT
Limitation of this document
> 134E22
XXXF22
XXXG22
XXXH22
XXXI22
XXX..22
XXXZ22
Touch screen
Control panel
“Memory pack”
option
= 054E22
= 091E22
>111E22
<132E22
Touch screen
Control Panel
“Memory pack”
option
Alarms #205, #206, #207, #208, #211, #212,
#213 not recognized with specific icon, but
the effects of the anomaly and the
resolution of the problem correspond to
the document.
It is possible to update the operating logic
software (PLC + Touch Screen) to the latest
version.
<051E22
>060E22
<079E22
>094E22
<100E22
XXXD22
XXXC22
XXXB22
XXXA22
Alarms #205, #206, #207, #208, #211, #212,
#213 not recognized with specific icon, but
the effects of the anomaly and the
resolution of the problem correspond to
the document.
Some images on the Touch screen panel
may differ from the document.
Some reference marks for electrical
components may differ from the document.
Touch screen
Control Panel NO
“Memory Pack”
option
PannElectromechan
ical Control Panel
Before carrying out any maintenance work on the machine, carefully read the instruction manual attached to the
machine and make sure you have understood its contents, especially with regard to the installation of the
machine, its connection to the power supply, maintenance.
Always refer to the electrical diagram of the machine, available inside the electrical box for more information about the
electrical connection, the electrical components, the analysis of the anomaly from the electrical point of view.