Page 10
Orba User Manual
Modes
DRUM
Drums are velocity-sensitive and will respond to different intensities of tapping, similar
to how a traditional drum changes its tone and volume by hitting it harder or softer. The
sounds also respond to how long your finger stays on each pad. Try holding your finger on
a cymbal to cut it short, or tap and release quickly on a tom to hear a long decay.
Drum mode has nine distinct drum sounds: one per pad, plus an additional one that is
triggered by using the Bump gesture. You can also keep trigger the shaker by holding pad
8 and, well... shaking.
Try it:
You can alternate between open and closed hi-hat sounds on the same pad
simply by changing the way you touch it. A tap with a quick release will let the
“cymbal” ring out, a tap and hold will “choke” the sound.
To Next Page
Loading...
