Arturia beatstep pro Calibration

BeatStep Pro
CV Calibration
Technical note
2
Version 1.0
Date 28/05/15
Page 1/1
Description
This note details the steps to dissassemble the BeatStep Pro Controller.
Equipment needed
 1 X BeatStep PRO
 1 X Cruciform ScrewDriver
 1 X Large table
 1 X Bost PH 000 x 40 ScrewDriver
 1 X TS cable Jack ==> Banana Plug
Equipment Inside of the unit
 20 X Grey Sensitive caps
 4 X Large rubber Pads + Films
 14 X Black screws
 30 X silver screws
 1 X MotherBoard
 1 X TouchBoard
 1 X Sync Rubber Button
 2 X Sequencer Rubber Button
 1 X Tempo Track Rubber Button
 1 X Drum Section Rubber Button
 1 X Sequencer 1 Section Rubber Button
 1 X Sequencer 2 Section Rubber Button
 1 X Project Section Rubber Button
 1 X Transport Section Rubber Button

Arturia beatstep pro Specifications

General

MIDI out	Yes
USB version	2.0
USB ports quantity	1
Apple docking compatibility	-
Product color	White
Drum pads material	Rubber
Number of drum pads	16
Built-in optical drive	No
Power supply type	AC

Weight and Dimensions

Depth	163 mm
Width	415 mm
Height	36 mm
Weight	1450 g