Personalizing Your Phone
20321611en_ba_a0 37
Storing a Function under a Key – Function Key
You want to call up a frequently used function, for example "call diversion", using a single keystroke rath-
er than having to enter it by hand.
You can store a function under a configurable key.
A function key is assigned 2 memories. Usually a function
• is activated with the instruction sequence of memory 1
• and is deactivated with the instruction sequence of memory 2
The display symbols to indicate the status of the 4 configurable keys:
• Digit visible: Function is activated.
• Digit not visible: Function is deactivated.
<long> To store a function under a configurable key: Press the key and hold it down
for a moment.
Key not configured: The display shows "NUMBER KEY".
Note
Key already configured: See "Clearing a key".
/\ Press the "/\" Foxkey repeatedly until the display shows "FUNCTION KEY".
OK Press the "OK" Foxkey.
/\ Press the "/\" Foxkey repeatedly until the display finds the function you want.
OK Press the "OK" Foxkey.
The display shows "MEMORY1: ..." and the code for the selected function or - if neces-
sary - the menu for configuring the function.
If necessary, configure the function.
Note
See also "Defining Functions".
OK To confirm the function and setting: Press the "OK" Foxkey.
The display shows "MEMORY2: ..." and the code for deactivating the function.
OK Press the "OK" Foxkey.
The function is stored under the key.
1
4
☛
To Next Page
Loading...
