ascon Gammadue Series User Manual

22
4 - Operations
4.3.3 ALARMS PARAMETERISATION MENU
é OP1
é OP2
é dir
é 0
é 0
Al.Par
AL.1OP
AL.2OP
OP.1a
AL.1lb
AL.2lb
é dir
OP.2a
Alarms
parameterisation
menu
AL1 alarm output
none/OpI
/Op2/Op3/Op4
AL2 alarm output
none/OpI
/Op2/Op3/Op4
AL1 alarm action
dir/reU
AL2 alarm action
dir/reU
AL1 alarm
Latching/Blocking
none/ltch
/bloc/ltbl
AL2 alarm
Latching/Blocking[1]
none/ltch
/bloc/ltbl
Back to AL.1Sr
Note:
[1] Only those alarms that are configured different than zero are shown
during the parameterisation phase (fields
op page 17).
PASS
Unit
Conf
énone
OK
Con1
Con2
4.3.5 CONFIGURATION MENU
No
Yes
Entering digits
I - L - M - N of the
configuration code
(chapter 3.2 pages 15,
16)
Entering digits
O - P of the
configuration code
(chapter 3.2 pages 15,
16)
Engineering units
(see table 2)
Back to the
operator
menu
Configuration
menu
When an unconfigured indicator is powered up for the first time, the
display shows:
See chapters 3, 3.1 and 3.2 starting from page 14.
Conf
Must be equal to
the value of the
parameter
Code
Password Entry
J1 EN-ed3 17-02-2009 15:05 Pagina 22

ascon Gammadue Series Specifications

General

Brand	ascon
Model	Gammadue Series
Category	Security System
Language	English