2
Information
cc
NOTES
ON ELECTRIC
SAFETY AND
ELECTROMAGNETIC
COMPATIBILITY
Please, read these instructions carefully before proceeding with the installation of the
controller.
Class II instrument, rearl panel mounting.
This indicator has been designed in compliance with:
Regulations on electrical apparatus (appliance, systems and installations) according to
the European Community directive 73/23/EEC amended by the European Community direc-
tive 93/68/EEC and the Regulations on the essential protection requirements in electrical
apparatus EN61010-1: 93 + A2:95.
Regulations on Electromagnetic Compatibility according to the European Community
directive #89/336/EEC, amended by the European Community directive #92/31/EEC,
93/68/EEC, 98/13/EEC and the following regulations:
Regulations on RF emissions
EN61000-6-3: 2001 residential environments
EN61000-6-4: 2001 industrial environments
Regulation on RF immunity
EN61000-6-2: 2001 industrial equipment and system
It is important to understand that it’s the responsibility of the installer to ensure compliance
with the regulations on safety requirements and EMC.
The device has no user serviceable parts and requires special equipment and specialised
engineers. Therefore, a repair cannot be carried out directly by the user. For service or repair,
contact the manufacturer or your sales represenattive.
All the information and warnings about safety and electromagnetic compatibility are
marked with the
B sign, at the side of the note.
J1 EN-ed3 17-02-2009 15:05 Pagina 2
To Next Page
Loading...
Need help?
General