PERSONAL CD PLAYER
PRODUCT GUIDE
Model: ATA22AA002A
Ver.01 03/04/22
3
Power
Loading a CD
1. Press the OPEN button to open the CD DOOR.
2. Load a CD into the player, label side up.
3. Close the CD DOOR.
Playing a CD
1. Press the PLAY/PAUSE button to begin playing the loaded CD.
Programming a CD
1. Press the STOP button to stop the CD during play.
2. Press the PROG button.
3. “00” will begin to blink on the DISPLAY.
4. Press the SKIP/SEARCH buttons to select the track you wish to program.
5. Press the PROG button to save the selected track to the program.
6. Repeat steps 4 and 5 to program up to 20 tracks to play in the order they are
programmed.
7. Press the PLAY/PAUSE button to begin playing the programmed tracks.
CD
Using a Micro-USB to USB cable, connect to the USB port of a powered on
computer or USB power adaptor (not included) to power the CD player.
Requires 2 AA batteries (not included).
Note: Please remove batteries if using the USB cable for power.
To Next Page
General