EasyManua.ls Logo

Ashford FRINGE TWISTER User Manual

Ashford FRINGE TWISTER
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Ashford Guarantee
Thank you for purchasing this Ashford product. In the unlikely event there is
any fault in manufacture we will replace the item. To validate our guarantee
please visit our website or write to us.
Ashford Handicrafts Limited
Factory and Showroom: 415 West Street
PO Box 474, Ashburton 7700 New Zealand
Telephone 64 3 308 9087 Facsimile 64 3 308 8664
Email: sales@ashford.co.nz Internet: www.ashford.co.nz
INSTRUCTIONS
FRINGE TWISTER
Make a perfect twisted fringe on scarves, handwoven garments or needlework projects.
Create cording from cotton or twist sliver for fibre craft projects. Add beads and metalics for texture and fun.
FT409022012V2
Question and Answer IconNeed help?

Do you have a question about the Ashford FRINGE TWISTER and is the answer not in the manual?

Ashford FRINGE TWISTER Specifications

General IconGeneral
BrandAshford
ModelFRINGE TWISTER
CategoryCarders
LanguageEnglish

Summary

Twisted Fringe Procedure

Setup and Initial Twisting

Clamp the twister to a table and prepare fibre groups for twisting.

Plying and Finishing

Ply the twisted halves together, knot the ends, and repeat for the desired fringe.

Twisted Sliver Procedure

Setup and Twisting Sliver

Clamp twister, divide sliver into thicknesses, and rotate handle clockwise.

Anti-clockwise Twist and Finishing

Rotate opposite ends anti-clockwise, tie knots, and follow hints for best results.

Related product manuals