Ashley EC95 User Manual

EC95 1
WOOD BURNING CIRCULATOR HEATER
MODELS EC95/BEC95
C
O
M
P
A
N
Y
U
N
I
T
E
D
S
T
A
T
E
S
S
T
O
V
E
C
S
S
U
United States Stove Company • 227 Industrial Park Road • P.O. Box 151 • South Pittsburg, TN 37380
SAFETY NOTICE:
If this heater is not properly installed, a house fire may result.
For your safety, follow the installation directions.
Contact local building or fire officials about restrictions and
inspection requirements in your area.
CAUTION:
Read all instructions carefully before starting the installation
or operation of this heater.
Improper installation may void your warranty.
DO NOT USE THIS HEATER IN A MOBILE HOME OR TRAILER
Tested to UL 1482
Listed By:
website: www.usstove.com
Installation, Operation and Maintenance Instructions
851394 C

Ashley EC95 Specifications

General

Brand	Ashley
Model	EC95
Category	Heater
Language	English

Summary

Building Codes and Safety Standards

How This Heater Operates

Explains the basic working principle of the heater, including air flow and heat transfer.

Selecting a Location for the Heater

Guides on choosing a suitable and safe location for the heater installation, considering clearances and traffic.

Floor Protection

Chimney Connector and Chimneys

Heater Inspection

Tools and Supplies Needed for Installation

Heater Installation

Minimum Clearance to Combustible Walls and Ceilings

Specifies required clearances to prevent fire hazards with walls and ceilings, referencing figures.

Heater Operation

To Build a Fire

Step-by-step guide on how to safely start a fire in the heater, including thermostat and door operation.

Firetending

Wood Facts

Information about wood types, moisture content, and storage for efficient burning and creosote prevention.

Routine Maintenance and Venting System Care

Heater Maintenance

Specific steps for cleaning and maintaining the heater's exterior, gaskets, and components.

Disposal of Ashes

Safe procedures for disposing of hot ashes in a metal container, away from combustible materials.

Venting System (Chimney Connector and Chimney)

Explains the function of the venting system and the formation/hazards of creosote buildup.

Chimney Connector Pipe-Corrosion Inspection

How to inspect the chimney connector pipe for corrosion and potential replacement.

Troubleshooting

The Venting System-Key to Good Heater Performance

Emphasizes the venting system's critical role in heater performance and draft.

Addressing Operational Problems

What to Do If the Heater Smokes, Burns Poorly or Excessive Creosote Accumulates in the Chimney

Solutions for problems like smoking, poor burning, and creosote buildup, including checking room vacuum.

What to Do If the Heater Burns Too Rapidly or Overheats

Steps to take if the heater is burning too fast or overheating, checking door seals and draft.

Quick Reference to Common Heater Operational Problems

A summary of common operational issues and their potential solutions for quick problem identification.

Final Checklist of Do's and Don'ts

Do's

Key recommendations for safe and proper heater installation, operation, and maintenance.

Don'ts

Important warnings and actions to avoid for safe heater operation and longevity.

Important Safety Notices