Asko D3251 Installation Instructions

Page 7
WARNING!
Make sure you put the protective slides on the legs to
prevent damaging the floor when you slide the unit
into place (see page 6).
1. Position the machine in front of the cabinet
opening.
2. Make the height adjustment while the dishwasher
is in front of the opening.
3. Pull out the drain hose to ensure there are no sharp
bends.
4. Start to feed water and drain lines and electric cord
(if necessary) into the access hole in the cabinet.
5. Gently slide the unit into the dishwasher opening.
As you do this, feed the drain line and inlet hose
into the access hole in the side of the cabinet.
WARNING! Be careful of sharp edges.
As you slide the unit into place, feed the drain line and
inlet hose into the access hole in the side of the cabinet.
MOMO
MOMO
MO
VING VING
VING VING
VING
THE MATHE MA
THE MATHE MA
THE MA
CHINE INTCHINE INT
CHINE INTCHINE INT
CHINE INT
O PLAO PLA
O PLAO PLA
O PLA
CECE
CECE
CE

Asko D3251 Specifications

General

Brand	Asko
Model	D3251
Category	Dishwasher
Language	English