To Next PageTo Next Page
Need help?Do you have a question about the Asko T700 Series and is the answer not in the manual?
General| Capacity | 7 kg |
|---|---|
| Control Type | Electronic |
| Color | White |
| Programs | Wool, Delicates, Synthetics, Cotton |
| Dimensions (H x W x D) | 850 x 595 x 585 mm |
General installation requirements and safety precautions for electrical and plumbing.
Safety instructions regarding electrical power and EMC wristbands.
Guidance for transporting or storing the dryer in unheated premises.
Instructions for proper scrapping and recycling of the dryer.
Explains air circulation for vented dryers (T700, T760) and their components.
Explains air circulation for condensing dryers (T720, T780) and their components.
Describes the path and function of drying air within the machine.
Explains the path and function of cooling air in condenser models.
Lists physical dimensions, weight, material, and power requirements for the dryer models.
Instructions for connecting the exhaust hose to vented dryers.
Instructions for connecting the condensation drain hose for condenser models.
Details on connecting the exhaust hose to a ventilation duct for vented models.
Guidelines for placing the dryer in a freestanding setup.
Instructions for installing vented models under cabinets or worktops.
Steps for mounting the dryer on top of an ASKO washer.
General information and requirements for power supply connections.
Detailed steps for connecting a three-wire power cord.
Detailed steps for connecting a four-wire power cord.
Step-by-step instructions for reversing the dryer door hinges.
Diagram and labels for the front view of the dryer.
Diagram and labels for the rear view of the dryer.
Explanation of the overheat protection switch and reset procedure.
Troubleshooting steps for when the dryer does not start.
Troubleshooting steps for when the dryer stops after releasing the start button.
Troubleshooting steps for slow drying times.
Tips to prevent wrinkled clothes after drying.
Troubleshooting steps for a running motor with a stopped drum.
Explains normal noises and troubleshooting for unusual noises.
Information on error messages displayed on T760/T780 models.
Troubleshooting steps for when clothes do not dry properly.
Troubleshooting steps for the dryer stopping after 20 minutes.
Troubleshooting for overheat protection activation after cleaning.
Troubleshooting for overfill indication when the tank is empty.
Explains maximum program time fault and its causes.
Details on the motor, its part number, and specifications.
Information on the capacitor, its part number, and value.
Details on the pump, its part number, and resistance.
Information on the filter, its part number, and leakage current.
Details on the indicator lamp, its part number, and current.
Information on the thermistor, its part number, and resistance.
Details on the contactor, its part number, and resistance.
Information on thermostats for T700 and T720, including part numbers and temperatures.
Details on the overheat protection thermostat, its part number, and function.
Information on the humidity sensor, its part number, and output signal.
Details on the overfill protection switch and its function.
Reference to installation pages for electrical connections.
Information on the door switch, its part number, and operation.
Details on the buzzer, its part number, and function.
Information on the control unit and its microprocessors.
Details on the LED window and its displays.
Information on the programmer's mechanical settings.
Graph showing heating sequences for T700 and T760 models.
Details on heating elements for T700/T760 and T720/T780.
Graph showing heating sequences for T720 and T780 models.
Instructions for running the test program and its parameters.
Explanation of error messages for T760/T780 models.
Error message for maximum drying time reached and solutions.
Error message for full condensed water container and solutions.
Error message related to the humidity sensor and solutions.
Error message related to the thermistor and solutions.
General notes on spin drying and conditions for consumption values.
Table showing consumption values for T700 model programs.
Table showing consumption values for T720 model programs.
General notes on spin drying and conditions for consumption values.
Table showing consumption values for T760 model programs.
General notes on spin drying and conditions for consumption values.
Table showing consumption values for T780 model programs.
List of required tools for servicing the dryer.
Lists parts and the specific tools needed for each.
Details and part numbers for special tools used in servicing.
Steps for removing the top cover of the dryer.
Instructions for changing the guides on the top cover.
Steps for reinstalling the top cover.
Steps for removing the lower cover of the dryer.
Step-by-step instructions for removing the front panel.
Step-by-step instructions for reinstalling the front panel.
Detailed steps for removing the rear panel.
Detailed steps for replacing the rear panel.
Steps for removing the inner and outer rear panels.
Steps for replacing the inner and outer rear panels.
Instructions for changing the foam rubber seal.
Steps for changing the rear bearing of the dryer.
Steps for changing the rear felt strip seal.
Steps for changing the heating element.
Steps for changing the overheat protection thermostat.
Steps for removing the input terminal block.
Steps for replacing the input terminal block.
Steps for removing the radio interference filter.
Steps for replacing the radio interference filter.
Steps for removing the contactor.
Steps for replacing the contactor.
Steps for changing a fuse in the fuse holder.
Steps for changing the fuse holder or insert.
Steps for removing the dryer drum.
Steps for replacing the dryer drum.
Steps for changing the drive belt.
Steps for changing the drum paddles.
Steps for removing the external rear fan housing.
Steps for replacing the external rear fan housing.
Steps for removing the dryer motor.
Steps for replacing the dryer motor.
Steps for changing the capacitor.
Steps for removing the exhaust vent.
Steps for replacing the exhaust vent.
Steps for removing the exhaust vent T-tube.
Steps for replacing the exhaust vent T-tube.
Steps for removing the humidity sensor.
Steps for installing the humidity sensor.
Steps for removing the thermostat.
Steps for replacing the thermostat.
Steps for removing the thermistor.
Steps for replacing the thermistor.
Steps for removing the front drum frame.
Steps for replacing the front frame.
Steps for changing the front felt seal.
Steps for changing the support roller.
Steps for removing the dryer door.
Steps for replacing the dryer door.
Steps for changing the hinge pin.
Steps for changing the hinge socket.
Steps for changing the door magnet plate.
Steps for changing the door handle.
Steps for changing the inner door.
Steps for changing the outer door seal.
Steps for changing the inner door seal.
Steps for changing the filter holder.
Steps for changing the door switch.
Steps for changing the door switch pin.
Steps for removing the control panel.
Steps for replacing the control panel.
Steps for changing the control panel knobs.
Steps for changing programming buttons.
Steps for changing the main power button.
Steps for changing the indicator lamp or symbol lens.
Steps for removing the panel handle.
Steps for changing pushbutton switches.
Steps for changing the PCU board.
Steps for changing pushbuttons.
Steps for removing the timer.
Steps for replacing the timer.
Steps for changing the buzzer.
Steps for changing the rotary selector.
Steps for changing the electronic control unit.
Steps for removing the ECU and its holder.
Steps for replacing the ECU and its holder.
Steps for removing the condenser.
Steps for replacing the condenser.
Steps for replacing the condenser housing.
Steps for changing the condensed water pump.
Steps for changing the microswitch for the water pump.
Steps for changing the foam rubber seal on the condenser.
Steps for changing the float in the condenser.
Steps for changing the water tank housing.
Steps for changing the water tank handle.
Steps for changing the side panels.
Steps for changing the base pan.
Steps for changing the front rail.
Description of the power button and indicator light.
Description of the start button function.
Explanation of preset programs and timed drying.
Explanation of temperature settings (Normal, Low, Air Fluff).
Explanation of options: Buzzer, Anti-crease, Quick Cooling.
Description of the power button and indicator light.
Description of the start button function.
Description of the timer control knob.
Explanation of temperature settings (Normal, Low, Air Fluff).
Explanation of options: Buzzer, Anti-crease, Quick Cooling.
Description of the power button and indicator light.
Description of the start button function.
Description of the stop button function.
Explanation of preset programs (P1-P4) and Sensidry system.
Explanation of the LED window display elements.
Basic instructions for changing preset programs.
Explanation of how program time is calculated and displayed.
Instructions for restoring preset programs to original settings.
Instructions on how to navigate through the program menus.
How to set the dry program, Timed Dry, or Air Fluff.
How to set the drying temperature for selected programs.
How to set program time and select Air Fluff.
How to set a delayed start time for programs.
How to set options like buzzer, anti-crease, and cooling.
Table listing available options for each program.
Detailed explanation of Normal, Low, Air Fluff, Buzzer, Anti-crease, Quick Cooling.
Steps to change the LED window language.
How to enable the child-safe start feature.
Instructions for cleaning the lint filter, including scale removal.
Instructions for emptying the condensed water tank.
Guidelines for cleaning the exterior of the dryer.
Steps for cleaning the fan.
Instructions for cleaning the condenser.
Instructions for replacing screws with fixing clips for the lower cover.
Instructions for installing female fixing clips.
Instructions for installing male fixing clips.
