Asko T712 - Page 29

9.
Insert the cover washer in place of the door
magnet.
10.
Insert the screws so that the door magnet and
cover washer are held in place.
11.
Remove the screw indicated. If using a con-
denser dryer, you must also open the con-
denser panel.
12.
Then fit the door securely on the right side of
the machine.
13.
Secure the hinge attachment using the screws
in the sequence shown in the picture.
1
3
2
14.
Replace the screw you removed in step 11.
15.
Replace the lower front plate.
29Customer Care Center
1-800-898-1879
www.askousa.com
Reversing the door