Start Stop
P1 P2 P3 P4
Menu Enter
We know you’re excited about owning an ASKO dryer and you’re anxious to get started, so here is a brief summary of the operating
procedures. To get the most of the features of your machine, we recommend that you read your Use and Care Guide.
THE CONTROL PANELTHE CONTROL PANEL
Models T760 and T780 have ASKO’s state-of-the-art EasyControl™ panel, as illustrated below. To select a program, simply press one of the
preset program buttons then press Start. Refer to “Preset Programs” below for a definition of these programs.
Stop Button
Press to stop
a program.
Preset Programs
Press one of these buttons
to select a program.
LED Window
Displays the program, temperature settings,
and program run time.
Dryer Quick Start Guide
T760/T780
Power Button
Press to turn on power
to the machine.
Program Selection Controls
These buttons allow you to customize the preset program
settings, such as temperature settings, turning the buzzer off,
setting delay start time, etc. Refer to the Use and Care Guide
for instructions.
Power Indicator Light
Glows when the power
is turned on.
Power ButtonPower Button
The Power button turns the power to the machine on and off. When the power is on, the power indicator light glows red. The power
must be on before you can set the programs or start the machine.
Start and Stop ButtonsStart and Stop Buttons
These buttons start or stop a program. If you open the door during a program, the dryer will stop tumbling automatically. If you
interrupt a program by opening the door, the dryer will remember where in the program it stopped. To continue the program, close
the door and press Start.
You can also interrupt a program by pressing Stop for three seconds. If you stop the dryer this way, however, it cancels the
program in progress. You will have to select a new program to restart.
Preset ProgramsPreset Programs
There are four preset programs, as defined in the table below. To select a program, simply press one of the program buttons and press Start.
For additional programming options, refer to the Use and Care Guide.
With ASKO’s Sensidry™ system, you need never worry about overdrying your laundry. Just select the proper program for the type of fabric
you’re drying and Sensidry does the rest. Once you select a program, Sensidry monitors the temperature and measures the humidity level.
When it detects the appropriate measurements, it automatically shuts off the machine.
Preset Dry
Program Program Types of Laundry Temp Anti-Crease Buzzer
P1 Extra Dry Heavy fabrics, such as denim jeans Normal 1 hour On
P2 Dry Towels, cotton, linen, etc. Normal 1 hour On
P3 Normal Dry Permanent press, synthetics, etc. Normal 1 hour On
P4 Iron Dry Washable silk, acrylics, etc. Low * 1 hour On
ASKO’s EasyControl™ panel makes it simple to customize the preset programs to perfectly fit your laundry needs. For example, you can
reprogram the dry temperature, change the cool-down time, set a delayed start, etc. For instructions, refer to “Customizing the Preset
Programs” in your Use and Care Guide.
Start
Stop
Start Button
Press to start
a program.
* The dry temperature for Program P4 on Model T780 is Normal.
To Next Page
Need help?
General
