Preset Programs
There are four preset programs, as defined in the table below. To select a program, simply press one of the program buttons and press Start.
For additional programming options, refer to the Use and Care Guide.
With ASKOs Sensidry system, you need never worry about overdrying your laundry. Just select the proper program for the type of fabric
youre drying and Sensidry does the rest. Once you select a program, Sensidry monitors the temperature and measures the humidity level.
When it detects the appropriate measurements, it automatically shuts off the machine.
Power Button
The Power button turns the power to the machine on and off. When the power is on, the power indicator light glows red. The power
must be on before you can set the programs or start the machine.
Start and Stop Buttons
Once you have selected a program (P1P4), press this button to start the dryer. If you open the door during a program, the dryer
will stop tumbling automatically. The dryer will remember where in the program it stopped. To continue the program, close the
door and press Start.
You can interrupt a program by pressing Stop for three seconds. If you stop the dryer this way, it cancels the program in progress.
You will have to select a new program and press Start to restart the dryer.
We know youre excited about owning an ASKO dryer and youre anxious to get started, so here is a brief summary of the operating
procedures. To get the most of the features of your machine, we recommend that you read your Use and Care Guide.
THE CONTROL PANEL
Models T761 and T781 have ASKOs state-of-the-art EasyControl panel, as illustrated below. To select a program, simply press one of the
preset program buttons then press Start. Refer to Preset Programs below for a definition of these programs.
Stop Button
Press to stop
a program.
Preset Programs
Press one of these buttons
to select a program.
LCD Window
Displays the program, temperature settings,
and program run time.
Dryer Quick Start Guide
T761/T781
Power Button
Press to turn on power
to the machine.
Program Selection Controls
These buttons allow you to customize the preset program
settings, such as temperature settings, turning the buzzer off,
setting delay start time, etc. Refer to the Use and Care Guide
for instructions.
Power Indicator Light
Glows when the power
is turned on.
Preset Dry
Program Program Types of Laundry Temp Anti-Crease Buzzer
P1 Extra Dry Heavy fabrics, such as denim jeans Normal 1 hour On
P2 Dry Towels, cotton, linen, etc. Normal 1 hour On
P3 Normal Dry Permanent press, synthetics, etc. Normal 1 hour On
P4 Iron Dry Washable silk, acrylics, etc. Low * 1 hour On
ASKOs EasyControl panel makes it simple to customize the preset programs to perfectly fit your laundry needs. For example, you can
reprogram the dry temperature, change the cool-down time, set a delayed start, etc. For instructions, refer to Customizing the Preset
Programs in your Use and Care Guide.
Start Button
Press to start
a program.
* The dry temperature for Program P4 on Model T781 is Normal.
To Next Page
Need help?
General
