Test program/faultfinding for WM55A/66A
Activation:
1. Switch the machine off and on with the main switch.
2. Press 5 x S5 or short-circuit via E14 and press S9.
S1
S2
S3
S4
S5
S6
S7 S8
S9 S10
5 x S5 Test program
Test 1 Test 2
S1= No function S1= No function
S2= Inlet valve 1 S2= Drain pump
S3= Inlet valve 2 S3= motor Normal action
S4= Inlet valve 3 S4= motor Gentle action
S5= Inlet valve 4 S5= Spin
S6= Door solenoid S6= Test Wash Process Sensor
S7= Heater relay
S8= Switch to Test 2 or S8= switch to Test 1
S9= Exit test program
To Next Page
Loading...
