11309424
Shutdown, Flushing, and Storage
D If Zip Clean will be exposed to freezing temperatures, drain all water out of pump. If it must be stored in
freezing temperatures, flush Zip Clean with a 50% antifreeze solution, and relieve pressure. Flush Zip
Clean before you use it again to remove antifreeze.
If water freezes in Zip Clean, thaw it in a warm
room before you try to start it. Do not pour hot
water on or into pump; it could crack the ceramic
plungers.
CAUTION
D Before you store the Zip Clean overnight or
transport it, disconnect the water supply, and
turn off the fuel supply valve.
D After each use, wipe all surfaces of Zip Clean
with a clean, damp cloth.
ti1617a
To Next Page
Loading...