DIGITAL VIDEO RECORDER QUICK START GUIDE
13. CMS CONNECTION
14. PC PLAYBACK
For anything not covered in this quick start guide, please refer to the manual or contact your provider.
CMS is a computer program design
to devices on the WAN. From the software; devices can
be quickly added, configured & assigned to an e-Map.
1. Install and launch ASPECT CMS on a computer.
2. To log in to the software the username: admin;
password: admin – this should be modified to
increase security and prevent unauthorised
access.
3. The software will manage, display live video,
search playback video, set up e-map and allows
device setting configurations.
After performing a backup, to play the video on a computer, use the ASPECT video player.
1. Launch ASPECT player, downloaded from the QR code on this document
2. Navigate to Playlist and select ‘+’ then ‘add file’
3. Navigate to backed up video file and click open
4. Press play and/or use the control bar to control the video speed & direction
To Previous Page
Loading...
Need help?
General
