To Next PageTo Next Page
Need help?Do you have a question about the Aspen Pumps Xtra AX3008/1 and is the answer not in the manual?
Covers appliance usage by age groups, supervision, and child safety rules.
Details on proper electrical connection, breakers, fuse specifications, and voltage requirements.
Warnings about flammable locations, damaged power cords, and operating in wet rooms.
Cautions on cold air application, proper cleaning methods, and avoiding chemical solvents.
Minimum room size for installation and concerns about unventilated rooms and gas leaks.
Appliance intended for capable users; children require supervision.
Fuse specifications, avoiding wet hands, not pulling by cord, and technician-only repairs.
Instructions on moving the unit, using damaged plugs, and storage orientation.
Identifies components visible from the front, including air outlets and control panel.
Identifies components visible from the rear, such as drain outlets and air intakes.
Disclaimer that descriptions may differ and notes on working temperature ranges.
Lists accessories like exhaust hose, window slider kit, screws, and remote control with quantities.
Note regarding models without optional parts and remote controller button functionality.
Details on fan speed indicators (AUTO, HIGH, MED, LOW) and operation modes (AUTO, COOL, HEAT, DRY, FAN).
Explanation of main buttons like ON/OFF, Temp, Mode, Speed, Timer, Sleep, Swing.
Explanation of the filter reset light, its illumination, and how to reset it after cleaning.
Steps to prepare the unit, including location, hose installation, and plugging in.
Instructions for operating the unit in heating mode, including temperature and fan speed settings.
Instructions for operating the unit in cooling mode, including temperature and fan speed settings.
Instructions for dehumidifying and fan-only modes, including specific settings.
Explanation of auto-restart function and procedure for draining condensate water.
Guidelines for selecting location, clearance, gradient, and connecting the exhaust duct.
Introduction to the window kit designed for fitting various window applications.
Step-by-step guide for installing the window slider kit, including foam seal and securing the panel.
Instructions for cutting foam seal B and installing the security bracket with screws.
Connecting the exhaust duct and adaptor B to the window for ventilation.
Procedure for draining condensate water during dehumidifying mode via upper or pump drain outlets.
Specific steps for draining water using the pump drain outlet, ensuring hose security and flow.
Procedure for draining condensate water from the bottom tray when the tank is full.
Steps for cleaning the air filter, including turning off power, vacuuming, washing, and drying.
Instructions for wiping the unit with a dry or damp cloth and handling long-term storage.
Important warnings against using chemicals, pouring water directly, or using hot water for cleaning.
Troubleshooting causes and solutions for when the air conditioning unit will not operate.
Troubleshooting causes and solutions for when the unit doesn't start after pressing ON/OFF.
Troubleshooting causes and solutions for poor cooling effect when air is blowing out.
Troubleshooting causes and solutions for noise or vibration issues, such as uneven ground.
Detailed explanation of the buttons on the remote control and their functions.
Explanation of the symbols and indicators shown on the remote control's LCD screen.
Note that cooling-only units do not have heating functions, and remote functions will have no effect.
Instructions for using the ON/OFF button to start or stop the air conditioner.
How to switch between Celsius and Fahrenheit for temperature display on the remote.
How to use SPEED for fan control and DISPLAY for backlight management.
Using iFEEL for temperature display and TIMER for setting operation schedules.
Activating HEALTH functions and using the iCLEAN function for automatic cleaning.
Details on iCLEAN duration and using temperature adjustment buttons.
How to use TURBO for faster cooling/heating and MODE to cycle through operations.
Using SLEEP mode for quiet operation and SWING for air direction control.
Explanation of the Anti-F function for preventing mould smell and how to set/cancel it.
Using ELE.H for electric heating and ECO mode for lowest electricity consumption.
How to operate the unit in automatic mode, selecting fan speed and starting/stopping.
How to operate in cooling or heating mode, setting temperature and fan speed.
How to operate in fan-only mode and dehumidify mode, setting fan speed and temperature.
Step-by-step instructions for opening the remote, inserting batteries, and replacing the cover.
Important attention points for using the remote controller, including range, obstacles, and battery care.
General| Brand | Aspen Pumps |
|---|---|
| Model | Xtra AX3008/1 |
| Category | Air Conditioner |
| Language | English |
