How to fix Aspes ACHB1301 when there is no ignition?
If your Aspes cooker isn't igniting, here's what you can check: * **Power Supply:** Ensure the cooker is properly connected to a power source. * **Upper Hob Cover:** Make sure the upper hob cover is correctly installed. * **Gas Supply:** Verify that the gas supply is fully open.
What to do if I smell gas from my Aspes ACHB1301 Cookers?
If you detect a gas odor from your Aspes cooker, immediately check the following: * **Gas Cocks:** Ensure that no gas cocks have been left open. * **Gas Cylinder Connection:** Verify that the connection between the gas cylinder and the cooker is leak-proof.
Why does my Aspes ACHB1301 Cookers ignite incorrectly?
If your Aspes cooker is igniting incorrectly, here are some potential causes and solutions: * **Gas Supply:** Ensure the gas supply is fully open. * **Upper Hob Cover:** Verify the upper hob cover is correctly fitted. * **Ignition Plug:** Wipe off any foreign materials from the ignition plug with a cloth. * **Upper Hobs:** Carefully dry the upper hobs if they are wet. * **Flame Spreader Holes:** Clean the flame spreader if the holes are clogged.
What to do if the flame turns off during operation in Aspes Cookers?
If the flame on your Aspes cooker turns off during operation: * **Overflow Food:** If overflow food extinguishes the flame, turn off the upper hob, wait one minute, and then try to ignite it again. * **Air Currents:** If a strong current of air has extinguished the flame, turn off the relevant upper hob and check the cooking area for air currents (such as open windows). Wait one minute before attempting to ignite it again.
Why is the flame yellow on my Aspes Cookers?
A yellow flame on your Aspes cooker can be due to: * **Flame Spreader Holes:** Clogged flame spreader holes. Clean the flame spreader. * **Gas Type:** Using a different type of gas. Check the gas being used.
How to fix Aspes ACHB1301 when the lighter is not operating?
If the lighter on your Aspes cooker is not operating, try the following: * **Ignition Plugs:** Clean the ends and body parts of the ignition plugs in the upper hobs with a dirt-removing material, as they may be contaminated. * **Upper Hob Channels:** Clean and open any blocked channels on the upper hobs.
Why is there noise coming when burning or during ignition in Aspes ACHB1301?
If you hear noise when the Aspes cooker is burning or during ignition, the upper hob cover may be badly fitted. Install the upper hob cover correctly.
Why is the flame unstable on my Aspes Cookers?
An unstable flame on your Aspes cooker might be caused by a badly fitted upper hob cover. Ensure that the upper hob cover is correctly installed.
General| Colour | Black |
|---|---|
| Model | ACHB1301 |
| Category | Cookers |
| Brand | Aspes |
| Type | Hob |
To Next Page