ASROCK Rack ALTRAD8UD-1L2T - RAS Configuration

ALTRAD8UD-1L
ALTRAD8UD-1L2T
46 47
English
3.3.2 RAS Conguration
Hardware EINJ
Use this item to enable or disable hardware EINJ support. If disabled, the EINJ is soware
simulated.
DRAM EINJ No Trigger
Avoid triggering DRAM errors with Hardware EINJ. If enabled, DRAM Hardware EINJ
requests will only ip bits at the desired DRAM address and not force the hardware to
immediately detect those bit ips.
Enable BERT
Use this item to enable Boot Error Record Table. If disabled, the BERT will not be
populated.
Enable SDEI
Use this item to enable Soware Delegated Exception Interface for NMI support.
Enable AGDI
Use this item to enable Arm Generic Diagnostic Dump and Reset Device Interface support.
is also requires SDEI to be enabled.
PCIe AER Firmware First
Use this item to enable rmware to detect PCIe AER rst. Otherwise OS detects AER.