33
2.10 Onboard Headers and Connectors
Onboard headers and connectors are NOT jumpers. Do NOT place
jumper caps over these headers and connectors. Placing jumper caps
over the headers and connectors will cause permanent damage of the
motherboard!
Serial ATA3 Connectors These eight Serial ATA3
(SATA3_0: see p.12, No. 19)
(SATA3) connectors support
(SATA3_1: see p.12, No. 18)
SATA data cables for internal
(SATA3_2: see p.12, No. 12)
storage devices. The current
(SATA3_3: see p.12, No. 17)
SATA3 interface allows up to
(SATA3_4: see p.12, No. 13)
6.0 Gb/s data transfer rate.
(SATA3_5: see p.12, No. 16)
(SATA3_A1: see p.12, No. 14)
(SATA3_A2: see p.12, No. 15)
Serial ATA (SATA) Either end of the SATA data
Data Cable cable can be connected to the
(Optional)
SATA3 hard disk or the SATA3
connector on this motherboard.
3.5mm Audio Cable Either end of the 3.5mm audio
(Optional)
cable can be connected to the
portable audio devices, such
as MP3 player and mobile
phone or the Line-in port of
your PC.
SATA3_1 SATA3_3 SATA3_5 SATA3_A2
SATA3_0 SATA3_2 SATA3_4 SATA3_A1
To Next Page
Loading...
