ASROCK B450M Pro4-F - 2.8 M.2_SSD (NGFF) Module Installation Guide (M2_1)

31
English
B450M Pro4-F
RGB LED Header
(4-pin RGB_HEADER1)
(see p.1, No. 21)
RGB LED header is used to con-
nect RGB LED extension cable
which allows users to choose
from various LED lighting ef-
fects.
Caution: Never install the RGB
LED cable in the wrong orienta-
tion; otherwise, the cable may
be damaged.
*Please refer to page 38 for for
further instructions on these two
headers.
Addressable LED Header
(3-pin ADDR_LED1)
(see p.1, No. 22)
is header is used to connect
Addressable LED extension cable
which allows users to choose
from various LED lighting
eects.
Caution: Never install the
Addressable LED cable in the
wrong orientation; otherwise,
the cable may be damaged.
*Please refer to page 39 for fur-
ther instructions on this header.
AMD FAN LED Header
(4-pin AMD_FAN_
LED1)
(see p.1, No. 5)
AMD FAN LED Header is used
to connect RGB LED
extension cable that comes with
AMD heatsink. e cable
connection allows users to choose
from various LED lighting
eects.
Caution: Never install the FAN
LED cable in the wrong orienta-
tion; otherwise, the cable may
be damaged.
12V G R B
1
12V G R B
1
VOUT
DO_ADDR
GND
1