ASROCK CML-HDV/M.2 TPM R2.0 - M.2_SSD (NGFF) Module Installation

English
22
2.7 M.2_SSD (NGFF) Module Installation Guide (M2_1)
e M.2 is a small size and versatile card edge connector that aims to replace mPCIe and
mSATA. e Ultra M.2 Socket (M2_1) supports M Key type 2260/2280 M.2 SATA3 6.0
Gb/s module and M.2 PCI Express module up to Gen3 x4 (32 Gb/s).
Installing the M.2 SSD Module
Step 1
Prepare a M.2 SSD module and the
screw.
Step 2
Depending on the PCB type and
length of your M.2 SSD module, nd
the corresponding nut location to be
used.
No. 1 2
Nut Location A B
PCB Length 6cm 8cm
Module Type Type 2260 Type 2280