ASROCK Fatal1ty 990FX Professional Series - Storage Confi Guration

64
3.4.4 Storage Configuration
SATA Controller
This item is for SATA3_1 to SATA3_6 ports. Use this item to enable or dis-
able the “SATA Controller” feature.
SATA Mode
This item is for SATA3_1 to SATA3_6 ports.Use this item to adjust SATA
Mode. The default value of this option is [IDE Mode]. Confi guration op-
tions: [AHCI Mode], [RAID Mode] and [IDE Mode].
If you set this item to RAID mode, it is suggested to install
SATA ODD driver on SATA3_5 or SATA3_6 port.
SATA IDE Combined Mode
This item is for SATA3_5 and SATA3_6 ports. Use this item to enable or
disable SATA IDE combined mode. The default value is [Enabled].
Marvell SATA3 Operation Mode
This item is for the two Marvell eSATA3 ports. Use this item to adjust the
“Marvell SATA3 Operation Mode” feature. Confi guration options: [Disabled],
[IDE Mode], [AHCI Mode] and [RAID Mode]. The default value is [IDE
Mode].
Marvell SATA3 Bootable
Use this to enable or disable Onboard Marvell SATA3 Option ROM. If
Option ROM is disabled, UEFI cannot use the SATA device to connect to
Marvell SATA3 controller as Boot Device.
If you want to build RAID on SATA3_5 and SATA3_6 ports,
please disable this item.