ASROCK Fatal1ty H170 - M.2 SSD (NGFF) Module Installation Guide; M.2 Module Installation Steps

26
27
English
2.7 M.2_SSD (NGFF) Module Installation Guide
The M.2, also known as the Next Generation Form Factor (NGFF), is a small size and
versatile card edge connector that aims to replace mPCIe and mSATA. The Ultra M.2
Socket (M2_1), supports M.2 PCI Express module up to Gen3 x4 (32 Gb/s).
*If M2_1 is occupied by a SATA-type M.2 device, SATA3_0 and the SATA function of
SATA3_2_3 will be disabled.
Installing the M.2_SSD (NGFF) Module
Step 1
Prepare a M.2_SSD (NGFF) module
and the screw.
3
2
4
5
BCDE
A
1
Step 2
Depending on the PCB type and
length of your M.2_SSD (NGFF)
module, nd the corresponding nut
location to be used.
No. 1 2 3 4 5
Nut Location A B C D E
PCB Length 3cm 4.2cm 6cm 8cm 11cm
Module Type Type2230 Type 2242 Type2260 Type 2280 Ty pe 22110