47
Host Clock Override (BCLK)
Use this to adjust the host clock (BCLK) frequency. Min: 95MHz, Max:
110MHz.
Spread Spectrum
This item should always be [Auto] for better system stability.
DRAM Timing Control
DRAM Confi guration
Load XMP Setting
Use this to load XMP setting. Confi guration options: [Auto], [Profi le 1] and
[Profi le 2]. The default value is [Auto].
DRAM Frequency
If [Auto] is selected, the motherboard will detect the memory module(s)
inserted and assigns appropriate frequency automatically.
CAS# Latency (tCL)
Use this item to change CAS# Latency (tCL) Auto/Manual setting. The
default is [Auto].
RAS# to CAS# Delay (tRCD)
Use this item to change RAS# to CAS# Delay (tRCD) Auto/Manual setting.
The default is [Auto].
Row Precharge Time (tRP)
Use this item to change Row Precharge Time (tRP) Auto/Manual setting.
The default is [Auto].
RAS# Active Time (tRAS)
Use this item to change RAS# Active Time (tRAS) Auto/Manual setting.
The default is [Auto].
Command Rate (CR)
Use this item to change Command Rate (CR) Auto/Manual setting. Min:
1N. Max: 2N. The default is [Auto].
To Next Page
Loading...
