63
2.17 Serial ATA (SATA) / Serial ATA2 (SATA2) Hard Disks Installation
This motherboard adopts Intel
®
X79 chipset that supports Serial ATA (SATA) / Serial
ATA2 (SATA2) hard disks and RAID (RAID 0, RAID 1, RAID 5, RAID 10 and Intel
Rapid Storage 3.0) functions. You may install SATA / SATA2 hard disks on this
motherboard for internal storage devices. This section will guide you to install the
SATA / SATA2 hard disks.
STEP 1: Install the SATA / SATA2 hard disks into the drive bays of your chassis.
STEP 2: Connect the SATA power cable to the SATA / SATA2 hard disk.
STEP 3: Connect one end of the SATA data cable to the motherboard’s SATA2 con-
nector.
STEP 4: Connect the other end of the SATA data cable to the SATA / SATA2 hard
disk.
2.18 Serial ATA3 (SATA3) Hard Disks Installation
This motherboard adopts Intel
®
X79 chipset that supports Serial ATA3 (SATA3) hard
disks and RAID (RAID 0, RAID 1, RAID 5, RAID 10 and Intel Rapid Storage 3.0)
functions for SATA3_0 and SATA3_1 connectors. It also adopts Marvell SE9230
chipsets which support Serial ATA3 (SATA3) hard disks and RAID (RAID 0, RAID 1
and RAID10) for SATA3_M0 to SATA3_M3 connectors. You may install SATA3 hard
disks on this motherboard for internal storage devices. This section will guide you to
install the SATA3 hard disks.
STEP 1: Install the SATA3 hard disks into the drive bays of your chassis.
STEP 2: Connect the SATA power cable to the SATA3 hard disk.
STEP 3: Connect one end of the SATA data cable to the motherboard’s SATA3 con-
nector.
STEP 4: Connect the other end of the SATA data cable to the SATA3 hard disk.
To Next Page
Loading...
