ASROCK Fatal1ty X99M Killer Series - SLI TM and Quad SLI TM Operation Guide; Installing Two SLI TM -Ready Graphics Cards

Fatal1ty X99M Killer Series
27
English
2.9 SLI
TM
and Quad SLI
TM
Operation Guide
is motherboard supports NVIDIA
®
SLI
TM
and Quad SLI
TM
(Scalable Link
Interface) technology that allows you to install up to two identical PCI Express x16
graphics cards. Currently, NVIDIA
®
SLI
TM
and Quad SLI
TM
technology supports
Windows
®
7 / 7 64-bit / 8 / 8 64-bit / 8.1 / 8.1 64-bit OS.
2.9.1 Installing Two SLI
TM
-Ready Graphics Cards
Step 1
Insert one graphics card into PCIE1 slot
and the other graphics card to PCIE2 slot.
Make sure that the cards are properly
seated on the slots.
Step 2
If required, connect the auxiliary power
source to the PCI Express graphics cards.
Requirements
1. You should only use identical SLI
TM
-ready graphics cards that are NVIDIA
®
certi-
ed.
2. Make sure that your graphics card driver supports NVIDIA
®
SLI
TM
technology.
Download the drivers from the NVIDIA
®
website: www.nvidia.com
3. Make sure that your power supply unit (PSU) can provide at least the minimum
power your system requires. It is recommended to use a NVIDIA
®
certied PSU.
Please refer to the NVIDIA
®
website for details.