ASROCK Fatal1ty X99X Killer Series - Installing Three SLI TM -Ready Graphics Cards

English
Fatal1ty X99X Killer Series
31
2.9.2 Installing Three SLI
TM
-Ready Graphics Cards
Step 1
Insert one graphics card into PCIE1 slot,
another graphics card to PCIE3 slot, and
the other graphics card to PCIE5 slot.
Make sure that the cards are properly
seated on the slots.
Step 2
Connect the auxiliary power source to the
PCI Express graphics card. Please make
sure that both power connectors on the
PCI Express graphics card are connected.
Repeat this step on the three graphics
cards.
Step 3
Align and insert the ASRock 3-Way SLI-
2S1S Bridge Card to the goldngers on
each graphics card. Make sure the ASRock
3-Way SLI-2S1S Bridge Card is rmly in
place.
3-Way SLI-2S1S Bridge Card
3
-
Way
S
L
I-
2S
1
S