ASROCK Fatal1ty Z68 Professional Gen3 Series - Super IO Confi Guration

77
3.4.5 Super IO Configuration
OnBoard Floppy Controller
Use this item to enable or disable fl oppy drive controller.
Serial Port
Use this item to enable or disable the onboard serial port.
Serial Port Address
Use this item to set the address for the onboard serial port. Confi guration
options: [3F8h / IRQ4] and [3E8h / IRQ4].
Infrared Port
Use this item to enable or disable the onboard infrared port.
Infrared Port Address
Use this item to set the address for the onboard infrared port. Confi gura-
tion options: [2F8h / IRQ3] and [2E8h / IRQ3].
SATA Controller0
This item is for SATA3_0, SATA3_1, SATA2_2 and SATA2_3 ports. Please
select [Compatible] when you install legacy OS. If native OS (Windows
®
XP / Vista
TM
/ 7) is installed, please select [Enhanced].
SATA Controller1
This item is for SATA2_4 and SATA2_5 ports. Use this item to enable or
disable the “SATA Controller1” feature.
Hard Disk S.M.A.R.T.
Use this item to enable or disable the S.M.A.R.T. (Self-Monitoring, Analy-
sis, and Reporting Technology) feature. Confi guration options: [Disabled]
and [Enabled].