ASROCK Fatal1ty Z77 Professional Series - Super IO Confi Guration

80
3.4.7 Super IO Configuration
OnBoard Floppy Controller
Use this item to enable or disable fl oppy drive controller.
Serial Port
Use this item to enable or disable the onboard serial port.
Serial Port Address
Use this item to set the address for the onboard serial port. Confi guration
options: [3F8h / IRQ4] and [3E8h / IRQ4].
Infrared Port
Use this item to enable or disable the onboard infrared port.
We recommend to use Intel
®
Z77 SATA ports (SATA3_0,
SATA3_1, SATA2_2, SATA2_3, SATA2_4 and SATA2_5) for
your bootable devices. This will minimum your boot time and
get the best performance. But if you still want to boot from
ASMedia SATA3 controller, you can still enable this in UEFI.