ASROCK H110M Combo-G - Power LED and Speaker Header; Serial ATA3 Connectors; USB 2.0 Headers; USB 3.0 Header

20
English
Power LED and Speaker
Header
(7-pin SPK_PLED)
(see p.1, No. 14)
Please connect the
power LED and the
chassis speaker to this
header.
Serial ATA3 Connectors
(SATA3_0)
(see p.1, No. 11)
(SATA3_1)
(see p.1, No. 12)
(SATA3_2)
(see p.1, No. 9)
(SATA3_3)
(see p.1, No. 10)
ese four SATA3
connectors support SATA
data cables for internal
storage devices with up to
6.0 Gb/s data transfer rate.
USB 2.0 Headers
(9-pin USB1_2)
(see p.1, No. 15)
(9-pin USB9_10)
(see p.1, No. 7)
DUMMY
GND
GND
+B
-B
USB_PWR
+A
-A
USB_PWR
1
DUMMY
GNDGND
+B
-B
+A
-A
USB_PWR
USB_PWR
1
Besides four USB 2.0 ports
on the I/O panel, there
are two headers on this
motherboard. Each USB
2.0 header can support
two ports.
*If USB3_1_2 is occupied,
the function of USB9_10
will be disabled.
USB 3.0 Header
(19-pin USB3_1_2)
(see p.1, No. 6)
1
IntA_PB_D+
Dummy
IntA_PB_D-
GND
IntA_PB_SSTX+
GND
IntA_PB_SSTX-
IntA_PB_SSRX+
IntA_PB_SSRX-
VbusVbus
Vbus
IntA_PA_SSRX-
IntA_PA_SSRX+
GND
IntA_PA_SSTX-
IntA_PA_SSTX+
GND
IntA_PA_D-
IntA_PA_D+
Besides two USB 3.0 ports
on the I/O panel, there
is one header on this
motherboard. Each USB
3.0 header can support
two ports.
*If USB9_10 is occupied,
the function of USB3_1_2
will be disabled.
1
+5V
DUMMY
PLED+
PLED+
PLED-
DUMMY
SPEAKER
SATA3_2 SATA3_3
SATA3_0 SATA3_1