ASROCK H55M - Storage Configuration

4949
4949
49
BIOS SETUP UTILITY
Storage Configuration
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Advanced
SATA Operation Mode
SATAII_1
SATAII_2
SATAII_3
SATAII_4
eSATAII_1
eSATAII_2
[IDE]
[Hard Disk]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
Select Screen
Select Item
+- Change Option
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
Select Screen
Select Item
+- Change Option
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
SATAII 1,2,3,4 Configuration
eSATAII 1,2 Configuration
[Compatible]
[Enhanced]
IDE
AHCI
Disabled
Options
3.4.43.4.4
3.4.43.4.4
3.4.4
Storage ConfigurationStorage Configuration
Storage ConfigurationStorage Configuration
Storage Configuration
SATA Operation Mode
Use this to select SATA Operation Mode. Configuration options: [IDE], [AHCI]
and [Disabled]. The default value is [IDE].
If you select [IDE] mode, the options “SATAII 1,2,3,4 Configuration” and
“eSATAII 1,2 Configuration” will appear.
If you select [AHCI] mode, the options “Hot Plug” and “Link Power Manage-
ment” will appear.
AHCI (Advanced Host Controller Interface) supports NCQ and other
new features that will improve SATA disk performance but IDE
mode does not have these advantages.