ASROCK H570M Pro4 - Rear Panel I;O Connectors; Storage and Internal Connectors

English
7
H570M Pro4
Rear Panel
I/O
•
3 x Antenna Mounting Points
•
1 x HDMI Port
•
1 x DisplayPort 1.4
•
2 x USB 3.2 Gen2 Ports (10 Gb/s) (ReDriver) (Supports ESD
Protection)
•
4 x USB 3.2 Gen1 Ports (Supports ESD Protection)
•
1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED
LED)
•
HD Audio Jacks: Line in / Front Speaker / Microphone
Storage
•
4 x SATA3 6.0 Gb/s Connectors, support RAID (RAID 0,
RAID 1, RAID 5, RAID 10, Intel Rapid Storage Technology
18), NCQ, AHCI and Hot Plug*
* If M2_2 is occupied by a SATA-type M.2 device, SATA3_1 will
be disabled.
•
1 x Hyper M.2 Socket (M2_1), supports M Key type 2280 M.2
PCI Express module up to Gen4x4 (64 Gb/s) (Only
supported with 11
th
Gen Intel® Core™ Processors) **
•
1 x Ultra M.2 Socket (M2_2), supports M Key type 2280 M.2
SATA3 6.0 Gb/s module and M.2 PCI Express module up to
Gen3 x4 (32 Gb/s)**
** Supports Intel® Optane
TM
Technology
** Supports NVMe SSD as boot disks
* *Supports ASRock U.2 Kit
Connector
•
1 x SPI TPM Header
•
1 x Chassis Intrusion and Speaker Header
•
2 x RGB LED Headers
* Support in total up to 12V/3A, 36W LED Strip
•
2 x Addressable LED Headers
* Support in total up to 5V/3A, 15W LED Strip
•
1 x CPU Fan Connector (4-pin)
* e CPU Fan Connector supports the CPU fan of maximum
1A (12W) fan power.
•
1 x CPU/Water Pump Fan Connector (4-pin) (Smart Fan
Speed Control)
* e CPU/Water Pump Fan supports the water cooler fan of
maximum 2A (24W) fan power.